BTL Industrial Solutions
Gearbox repair and refurbishment support

Gearbox down? We can get your gearbox working again.

Gearbox repair and refurbishment support across Buckinghamshire and Oxfordshire. Send photos, symptoms and site details, or call BTL Industrial Solutions to get the next step sorted.

Check your gearbox make

Type the make to see whether it is on BTL’s common support list. Not listed does not mean unsupported.

Identify your gearbox
We’ll collect
We diagnose
Repair / refurbish
Return to you
50 years’ industrial experiencePractical support for maintenance and production teams.
Crendon branch routeFocused support across Buckinghamshire and Oxfordshire.
Identification supportSend photos, markings and symptoms if the plate is unclear.
Repair or refurbishA clear route from enquiry to assessment and approved work.
Start here

Not sure what has failed? That’s fine.

You do not need every technical detail before getting in touch. Send what you can, and BTL Industrial Solutions can help identify the unit and guide the next move.

1

Send what you have

Photos, symptoms, visible markings, site location and urgency are enough to start. Noise, leaks, overheating, vibration or loss of drive all help build the picture.

2

BTL can help identify it

If your team calls it a gearbox, motor or drive unit, that’s fine. BTL can help work out what it is and what information is needed next.

3

Get a clear repair route

BTL can advise on logistics, inspection, quotation and the approved repair or refurbishment route.

Peace of mind starts with a clear next step. Send the details, and BTL can help route the enquiry properly rather than guessing.
Gearbox repair request

Tell us what’s failed.

A few details and photos are enough to start. Use “motor” if that is how your team refers to the unit.

Not sure of the make or model? Upload photos of the unit, plate, shaft, coupling and installation using the form below. BTL Industrial Solutions can help identify it.
Support for maintenance and production teams

We repair. We refurbish. We maintain.

BTL Industrial Solutions supports industrial sites with practical help for failed or failing gearboxes and drive units. The aim is simple: move maintenance teams from fault to a clear repair or refurbishment route.

Repair

For failed, noisy, leaking, overheating or under-performing units.

Refurbish

For worn units that may be restored before full failure.

Maintain

For planned maintenance where reliability, uptime and production continuity matter.

Peace of mind when production is under pressure

Speak to people who understand industrial drive failures.

When a unit fails, you need more than a guess. BTL can help identify what has failed, understand the symptoms and route the next practical step.

How to get help

How to get your gearbox repaired or refurbished.

One clear route: send details, agree logistics, complete strip-down and condition assessment where needed, then quote and complete the approved work.

Send details & photos

Share symptoms, site location, manufacturer if known, and photos of the unit, plate, shaft and installation.

Identify the unit

BTL reviews the visible details and helps identify the unit.

Agree logistics

Collection, delivery or the practical route to get the unit assessed is agreed.

Inspect & assess

The unit is inspected, stripped down where needed, and assessed before the repair route is confirmed.

Quote, repair, rebuild

BTL confirms the work before repair or refurbishment proceeds.

From early warning signs to full drive failure

Got a gearbox that’s had enough?

Noise, leaks, overheating, vibration or loss of drive — send the details and BTL can help identify the next repair route.

Noise / vibrationPossible wear, misalignment, bearing issues or internal damage.
Oil leaksSeal failure, housing issues, worn shafts or lubrication problems.
OverheatingLubrication, load, bearing, alignment or internal friction problems.
Loss of driveGear damage, coupling failure, shaft issues or seized internal components.
Bearing damageA common cause of noise, heat, vibration and progressive failure.
Gear wearWear, pitting, tooth damage or failure affecting performance and reliability.
Seized unitsUrgent assessment for locked, jammed or mechanically failed drive units.
Reduced performanceLoss of efficiency, irregular running, slipping, backlash or worsening reliability.
Repair and refurbishment capability

From strip-down to return-to-service.

The repair route depends on the condition of the unit. After inspection, BTL Industrial Solutions can confirm the practical scope before work proceeds.

Bearing replacementFor worn or damaged bearings causing noise, heat, vibration and failure.
Gear repair / replacementAssessment of worn, damaged or failed gears.
Shaft repairSupport for shaft wear, damage, alignment issues or related drive problems.
Seal replacementRepair routes for oil leaks and lubrication-related reliability issues.
Lubrication issuesAssessment of contamination, overheating and poor running conditions.
Strip-down & inspectionCondition assessment to understand internal wear and damage.
Reassembly & alignmentCareful rebuild support after component work and approved repairs.
Testing / checksPractical checks before the unit is returned to the agreed service route.
Oxfordshire and Buckinghamshire

Local support. Industrial focus.

This page is focused on gearbox repair and refurbishment support across Oxfordshire and Buckinghamshire, delivered through BTL Industrial Solutions’ Crendon branch.

BTL also supports customers through wider UK branch coverage, including High Wycombe, Uxbridge, Banbury, Bishop Auckland and Wrexham.

Serving industrial sites across Oxfordshire and Buckinghamshire with a practical route for urgent drive failures.
OXFORDSHIRE & BUCKINGHAMSHIRE OXFORDSHIRE BUCKINGHAMSHIRE BTL INDUSTRIAL CRENDON BRANCH Gearbox, geared motor and drive-unit repair / refurbishment support
If the plate is missing, painted over or unreadable

Still send it.

Maintenance teams are not always dealing with a clean manufacturer plate. The make, model, ratio or serial number may be missing, damaged, painted over or hard to read.

If you know the manufacturer, include it. If not, send photos of the unit, plate, shaft, coupling, mounting position and application. BTL can use those clues to identify the unit and route the next practical repair step.

Not sure what the unit is?

Send photos, visible markings and fault symptoms. BTL Industrial Solutions can help identify the unit.

Gearbox types supported

Gearboxes, geared motors and drive units.

BTL Industrial Solutions can help with helical gearboxes, bevel-helical units, worm gear reducers, planetary drives, shaft-mounted gearboxes, geared motors, speed reducers and industrial drive units.

Repair or refurbishment may be a practical alternative to replacement, depending on the condition of the unit and the outcome of assessment.

50 years of make & model experience

With 50 years of industrial experience behind BTL Industrial Solutions, your enquiry is in safe hands.

SEW Eurodrive
Nord
Bonfiglioli
Flender
Renold
Radicon
David Brown
Sumitomo
Bauer
Lenze
Motovario
Rossi
Fenner
PIV
STM
Stober
Benzler
Brevini
Falk
Hansen
Leroy Somer
Nissei
Tsubakimoto
WEG
View wider manufacturer list
ABBABMBaldorBauerBenzlerBonfiglioliBostonBrevini Brown PestellDanfossDavid BrownDemagDodgeEatonFalkFenner FlenderGardner DenverHansenHitachiHub CityKEBLenzeLeroy Somer MotovarioNeriNisseiNordParvaluxPIVRadiconReliance RenoldRossiSEW EurodriveSiemens / FlenderStoberSTMSumitomoTsubakimoto WEGWinsmithYilmazZAEOther / unknown
Workshop view

Inspect. Repair. Refurbish. Return to service.

The enquiry starts the route. Collection, inspection and quotation come before approved work. The exact scope is confirmed after assessment.

Failed unitBroken, leaking, noisy, seized or overheating unit.
Strip-down & assessmentBTL assesses the fault and confirms the recommended route.
Repaired / rebuiltApproved work moves through repair or refurbishment.
Frequently asked questions

Useful answers before you call.

Useful answers for maintenance managers, engineers and production teams before sending a gearbox repair or refurbishment enquiry.

Do you repair motors as well as gearboxes?

Many teams describe the failed unit as a “motor”, even when the issue involves a gearbox or drive assembly. Send photos and symptoms, and BTL can help identify what has failed.

What if we do not know the make or model?

You can still send the enquiry. Photos of the unit, visible markings, plate, shaft, coupling, mounting position and wider installation can help identify it.

What information should we send first?

Start with site location, urgency, photos and symptoms. Useful details include noise, oil leaks, vibration, overheating, loss of drive, seized unit and any visible manufacturer markings.

Can repair or refurbishment be an alternative to replacement?

In many industrial settings, repair or refurbishment may be a practical route, depending on the unit’s condition, urgency and cost. The right route should be confirmed after assessment.

What happens after we send the enquiry?

BTL reviews the details, helps identify the unit where possible, discusses urgency and location, and advises on the next route. This may involve collection, inspection, quotation and approved work.

Which areas does this service cover?

This page is focused on gearbox repair and refurbishment support across Oxfordshire and Buckinghamshire through BTL Industrial Solutions’ Crendon branch. BTL also supports customers through wider UK branch coverage.

Gearbox failed or failing? Send the details now.

Call 01494 441301 or upload photos, symptoms, visible markings and site location. BTL Industrial Solutions’ Crendon branch can help route the next practical step.